State-of-the-art and challenges of Pinch Analysis in energy systems

Authors

  • Bohong Wang National & Local Joint Engineering Research Center of Harbour Oil & Gas Storage and Transportation Technology / Zhejiang Key Laboratory of Petrochemical Environmental Pollution Control, Zhejiang Ocean University, Zhoushan 316022, P.R. China
  • Yujie Chen School of Mechanical Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, P. R. China
  • Chenglin Chang School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, P. R. China
  • Petar Sabev Varbanov Digital Development Center, Szechenyi Istvan University, Gyor 9026, Hungary

Abstract

Energy recovery and energy saving are critically important issues in industrial production. With the increasing scarcity of global energy resources and the heightened awareness of environmental protection importance, energy recovery and energy saving in industrial production have become significant factors driving the sustainable development of the industrial sector. Energy recovery technologies can reuse energy that might otherwise be wasted. For example, in industrial production, many processes generate large quantities of waste heat. By applying heat recovery technologies, this waste heat can be effectively recycled and utilised for heating or steam generation, improving energy utilisation efficiency.

Cited as: Wang, B., Chen, Y., Chang, C., Varbanov, P. S. State-of-the-art and challenges of Pinch Analysis in energy systems. Computational Energy Science, 2024, 1(2): 65-68. https://doi.org/10.46690/compes.2024.02.01

References: 

Alves, J. J., Towler, G. P. Analysis of refinery hydrogen distribution systems. Industrial & Engineering Chemistry Research, 2002, 41(23): 5759-5769.

Bandyopadhyay, S. Design and optimization of isolated energy systems through pinch analysis. Asia-Pacific Journal of Chemical Engineering, 2011, 6(3): 518-526.

Bonhivers, J. C., Korbel, M., Sorin, M., et al. Energy transfer diagram for improving integration of industrial systems. Applied Thermal Engineering, 2014, 63(1): 468-479.

Chang, C., Liao, Z., Costa, A. L., et al. Globally optimal synthesis of heat exchanger networks. Part III: Nonisothermal mixing in minimal and non-minimal networks. AIChE Journal, 2021, 67(11): e17393.

Chang, C., Liao, Z., Costa, A. L., et al. Globally optimal synthesis of heat exchanger networks. Part II: Nonminimal networks. AIChE Journal, 2020a, 66(7): e16264.

Chang, C., Peccini, A., Wang, Y., et al. Globally optimal synthesis of heat exchanger networks. Part I: Minimal networks. AIChE Journal, 2020b, 66(7): e162667.

Gadalla, M. A. A new graphical method for pinch analysis applications: Heat exchanger network retrofit and energy integration. Energy, 2015, 81: 159-174.

Hong, B., Wang, C., Zhang, K., et al. Carbon emission pinch analysis for shipping fuel planning considering multiple period and fuel conversion rates. Journal of Cleaner Production, 2023, 415: 137759.

Klemeˇs, J. J. Handbook of process integration (PI): Minimisation of energy and water use, waste and emissions. Cambridge, United Kingdom, Woodhead Publishing, 2022.

Li, C., Wang, B., Klemeˇs, J. J., et al. Greenhouse gas reduction through optimal breeding policy and diet configuration targeting via Carbon Emission Pinch Analysis. Journal of cleaner production, 2022, 379: 134729.

Linnhoff, B., Flower, J. R. Synthesis of heat exchanger networks: I. Systematic generation of energy optimal networks. AIChE journal, 1978, 24(4): 633-642.

Linnhoff, B., Hindmarsh, E. The pinch design method for heat exchanger networks. chemical engineering science, 1983, 38(5): 745-763.

Singhvi, A., Madhavan, K. P., Shenoy, U. V. Pinch analysis for aggregate production planning in supply chains. Computers & chemical engineering, 2004, 28(6-7): 993-999.

Tan, R. R., Foo, D. C. Pinch analysis approach to carbon constrained energy sector planning. Energy, 2007, 32(8): 1422-1429.

Wan Alwi, S. R. W., Manan, Z. A. STEPA new graphical tool for simultaneous targeting and design of a heat exchanger network. Chemical Engineering Journal, 2010, 162(1): 106-121.

Wang, B., Klemeˇs, J. J., Li, N., et al. Heat exchanger network retrofit with heat exchanger and material type selection: A review and a novel method. Renewable and Sustainable Energy Reviews, 2021a, 138: 110479.

Wang, B., Klemeˇs, J. J., Varbanov, P. S., et al. Heat exchanger network retrofit by a shifted retrofit thermodynamic grid diagram-based model and a two-stage approach. Energy, 2020, 198: 117338.

Wang, B., Varbanov, P. S., Klemes, J. J., et al. Heat integration incorporating leakage risk assessment of heat exchanger networks. Computers & Chemical Engineering, 2021b, 145: 107173.

Wang, F., Gao, Y., Dong, W., et al. Segmented pinch analysis for environmental risk management. Resources, Conservation and Recycling, 2017, 122: 353-361.

Yang, D., Qin, Y., Xu, Y., et al. Sequestration of carbon dioxide from the atmosphere in coastal ecosystems: Quantification, analysis, and planning. Sustainable Production and Consumption, 2024, 47: 413-424.

Yong, J. Y., Varbanov, P. S., Kleme ˇs, J. J. Heat exchanger network retrofit supported by extended Grid Diagram and heat path development. Applied Thermal Engineering, 2015, 89: 1033-1045.

 

Downloads

Download data is not yet available.

Downloads

Published

2024-06-16

Issue

Section

Articles